Amethyst is a great stone to use for a DIY ring, but you can also use a beautiful piece of druzy agate, a natural stone known for its glittery look. (Some examples of different druzy agates are shown in the materials, below.) Twisting wire around the stone or through drilled holes adds a bit of interest and plays well with the raw gemstone look.
1. Glue the stone to the ring blank. Let the ring dry overnight.
2. Thread the metal wire through the stone bead. You can use any thickness of wire here. With a thin wire, you'll be able to go around many times. With thicker wire, you will have a heavier look.
3. Cut the ends on each side with wire cutters, leaving some excess. Using pliers, twist the wire through the ring and back up to the other side. Repeat as many times as your wire thickness allows.
4. To hide the end of the wire, twist it into the opposite drilled hole so it's hidden within the stone. Once you've repeated for both sides and twisted around the ring as many times as you can, your ring is complete.
Now you're ready to rock your new gemstone cocktail ring! Take a look at some other raw gemstone jewels for your next DIY inspiration.
For more DIY jewelry projects from Kelly, go to A Sparkle Affair.